LINEAR MOVEMENT

Flying in a straight line between two points (horizontal, vertical, diagonal). We do this with one, two, three or four winches depending on the specific task.

SPEED:

22m/s (80km/h)*

PAYLOAD:

100kg*

* Working parameters can vary depending on the specific task

PLANAR MOVEMENT (V rig)

Movement in 2D (back and forth, up and down). We do this with two, three or four winches.

SPEED:

22m/s (80km/h)*

PAYLOAD:

100kg *

* Working parameters can vary depending on the specific task.

PLANAR MOVEMENT 2 (classic rig)

Movement in 2D (back and forth, up and down). We do this with two winches.

SPEED:

22m/s (80km/h)*

PAYLOAD:

100kg *

* Working parameters can vary depending on the specific task.

THREE DIMENSIONAL (3D)

Flying to each point in three dimensional space. We do this with 4 winches.

SPEED:

22m/s (80km/h)*

PAYLOAD:

100kg*

* Working parameters can vary depending on the specific task.

MA MOVEMENT

Independent movement of performers up and down on single lines/ropes and can be programmed to perform complex choreography. We do this with up to 6 winches*.

SPEED:

22m/s (80km/h)*

PAYLOAD:

100kg *

* Working parameters can vary depending on the specific task.

SPEED:

22m/s (80km/h)*

PAYLOAD:

100kg *

* може да варира според конкретните изисквания

AUTOMATED TRACKING STABILIZED REMOTE HEAD

The only stabilized remote head in the world that can keep the camera looking at a predefined point in space during the flight path.

No need to operate or program the remotre head!

  • The automated stabilized remote head can be used in many different modes.
  • Manual mode – the camera operator can use wheels or joystick to operate the camera. Movements can be recorded and repeated afterwards.*
  • Programmed mode – the remote head can be programmed by 3 axis based on the position (keyframe).*
  • Target mode TM – an option to define where the camera is looking during the flight with no need to operate or program. Ability to predefine multiple points in space and switch from looking at each of them on demand during the flight with a push of a button.
    Option to manually (joystick) edit the position coordinates for the current target area during the flight (camera operator can manually control where the camera is looking and when he stops – the camera will continue looking in that point in space regardless of the flight mode, trajectory, speed etc.)*

*All functionality of the automated gyro stabilized remote head is available with the MSD 3D Cable Cam®.

SPEED:

22m/s (80km/h)*

PAYLOAD:

100kg *

* Working parameters can vary depending on the specific task.